If GoPro Wont Turn On How To Fix Easily

Do you have questions like How to fix if GoPro wont turn on? or Why does my GoPro keep turning off?

These are questions that don’t just plague beginner users, even professionals have run into these issues when shooting with their GoPros. 

You had spent good money on your GoPro to capture every moment of your trip, but you can’t seem to get it to turn on?.

Luckily, there are several easy fixes that you can try to get your camera working again and capture the moments you never want to forget.

How To Fix Easily If GoPro Wont Turn On :

Here are some steps which you can follow to resolve this issue

• Remove impacted SD card & Replace with New One

This is really simple, but it often works.

Sometimes, even with a full battery, a GoPro can turn itself off.

Remove and replace your SD card by removing it from its slot (usually on the side of your camera) and popping it back in. 

This wont affect any photos or videos that are already stored on your SD card, but it will reset any settings you may have changed for troubleshooting purposes. 

Then try to turn on your camera again.

I’ve seen many cameras magically start working after removing and reinserting an SD card. So give it a try first!

• Remove Battery and Replace with new one

You turn on your GoPro and it doesn’t immediately start recording.

Your first instinct is to panic, but don’t! It may just be a dead battery.

The best way to fix if GoPro wont turn on is to remove its battery. 

Unscrew and open up your camera, then pop out its battery and wait around 10 seconds before putting it back in—that will reset everything inside. 

Before you do anything else, be sure you’re using a fresh set of batteries that are fully charged.

At last resort, pull your memory card (or SD card) out of its slot and reinsert it after a few seconds.

• Contact Customer Service to claim FREE Service using Warranty

It’s hard to tell when your camera has gone bad without trying to turn it on.

Luckily, if you paid a little extra for one of these high-tech products, you have a customer service department ready to assist you. 

For example, GoPro offers an exclusive warranty program for all its customers that costs $5 per year and covers repairs (Prices may vary).

Contact customer service right away before sending in your camera so they can get it started with a return authorization number (RA#). 

This will also help them know exactly what parts they need to repair your device if it turns out that it is faulty.

So don’t wait and contact customer support!

• Use another GoPro charger

Most of us carry around at least one extra device charger.

It’s like a little security blanket for many of us who fear running out of battery life when traveling or going on vacation. 

Even if your GoPro battery charger isn’t available, there may be another one nearby that can help you out, such as a laptop, iPhone charger or Android phone charger. 

So if you’ve been having issues with turning on your GoPro camera or any other generation camera but have a wall adapter handy, you may want to try that first to see if it can provide enough power to boot up your camera or not.

• Press Power button for 10 seconds to reset GoPro Camera and turn it ON back

If your GoPro Wont Turn On, make sure it has enough battery power by checking to see if its status light turns on when you press down on its power button. 

That being said, pressing and holding down on your device’s power button for at least 10 seconds can sometimes reset your camera and cause it to turn back on.

We recommend doing a hard reboot of your device after trying a soft reboot in order to ensure that both processes work as expected.

• Device used to Shut down due to Overheat so COOL it

If your GoPro Wont Turn On then it might be because your device got too hot and ended up in shut down of the device.

Make sure that you allow cooling time between takes to ensure a long and happy life for your camera.

Let it sit in a cool place after recording, or take off any additional cases or accessories that might get in its way of cooling down.

If you do happen to leave it on without letting it rest, give it a few seconds before you try restarting; otherwise, you may need to let it cool overnight. 

Also avoid leaving your camera in extreme temperatures (like a hot car) or extremely humid areas—both of these conditions can cause issues with your device as well.

The point is: make sure to give it some breathing room!

• Follow below steps if Water Damage

The first thing you want to do is inspect your camera for water damage if GoPro Wont Turn On

If it’s been out in heavy rain or submerged underwater, immediately power it off and pull any batteries.

The last thing you want is for water to get into any of your ports (charging port, microSD card slot, or HDMI). 

Leaving it exposed to air can help dry things out a bit, but be sure that all openings are completely free of moisture before turning your camera back on. 

Remove any accessories:

if your device gets wet then your GoPro Wont Turn On most likely.

We recommend removing its memory card as soon as possible.

Most memory cards will have some sort of waterproof sealant around them—but be careful not to break anything open if you don’t know exactly what you’re doing.

• Update your GoPro’s Firmware

This is a quick and simple way to make sure your camera’s software is up-to-date, which means it may be worth taking a look before troubleshooting.

Go to Settings > System Updates and check for an update, and if one exists, install it. 

The process will take about 10 minutes (note: you will have to charge your battery for at least 30 minutes before installing).

And if you have a HERO3 or HERO3+, remember that you’ll need to go through three separate update screens, so plan accordingly. 

This may seem like an obvious step, but there’s not much worse than installing new firmware only to realize your device was in perfect working order in its previous state.

• Disconnect everything from Camera and Reconnect

The most likely thing that is causing your GoPro Wont Turn On is a connection problem.

It is important to check that all connections are completely secure and make sure you are using any and all proper cables, adapters, etc. 

First, unplug all USB and power cables from your camera. Then, reconnect them.

This will cleanse any corrupt files or settings on your camera. Try to turn it on after doing so

Frequently Asked Questions

How long do GoPro batteries last?

The battery life of a GoPro largely depends on its resolution.

For example, if you use an HERO4 Black in 1080p, it can run for up to 2 hours.

If you record in 4K or higher resolutions, that time is likely to go down significantly (1 hour and 15 minutes). 

You’ll want to avoid recording too many consecutive clips at a high resolution because it will drain your battery faster than recording at a lower quality setting would.

How long is GoPro warranty?

As long as your GoPro camera is purchased and used in a country where it’s available, you can count on a year of manufacturer’s warranty coverage. 

This doesn’t cover defects or damage caused by normal wear and tear or mishandling, but any manufacturing defects will be covered within that first year.

For example, if your touchscreen fails while you’re using it, then you should be able to get it replaced under warranty. 

And if your battery dies out just six months after you bought it, then it should be replaced too—assuming nothing went wrong during that use. 

But remember: Normal wear and tear is not covered; scratches, cracks in housing, etc., are not manufacturing defects.

They’re also considered normal wear and tear and therefore not covered under warranty.

Which GoPro camera is waterproof?

There are currently seven models of HERO cameras available to purchase, three of which are waterproof:

HERO4 Session, HERO4 Silver and HERO4 Black

You can tell whether or not a particular model is waterproof by looking at its housing. 

Cameras with a silver border are waterproof up to 33 feet (10 meters)

Cameras with a black border are waterproof up to 131 feet (40 meters).

The newest model, HERO5 Session, is also waterproof up to 33 feet (10 meters)

Note that these numbers refer to water pressure in terms of feet below sea level, rather than linear measurement.

Why does my GoPro overheat?

Whether you own a Hero or a Hero3, if you don’t take some precaution to avoid high temperature, it may not last long.

And heating is not a simple matter – small temperature change leads to significant damage. 

One of our customers had an awful experience when he threw his camera into his car’s glove compartment.

The weather that day was much warmer than usual and it reached 68F degrees (about 20C) inside his car! 

He came back from work and found out that his camera only worked for 10 seconds and then shut down immediately.

It turned out that after such overheat episode, your GoPro will fail to turn on!

How deep can a GoPro go?

It might surprise you, but a GoPro is actually waterproof up to 131 feet (40 meters) and can be taken scuba diving.

It’s one of those things we would never think about (scuba diving with a camera) until someone actually does it. 

Here are some tips for getting that perfect shot:

Remove as much air from your housing as possible by slowly exhaling into it before closing;

point your camera up so that if any water should enter, it wont get into where you put in your SD card;

dive with someone who knows how to swim in case something goes wrong. 

Even though some users are impressed with their waterproof cameras, like anything else, there are always exceptions.

How do you clean a waterproof GoPro case?

Even though these cases are designed to keep your camera safe, they can still collect dirt and debris.

Keep your case in tip-top shape by cleaning it regularly.

However, be sure to use a very soft brush or cloth while cleaning; you don’t want to scratch up your camera’s lens. 

Try using a microfiber cloth dampened with rubbing alcohol as it will clean and disinfect at once.

In between deep cleanings, you can gently wipe off any grime on your waterproof case with a dry microfiber cloth or dust off any debris with compressed air or a soft brush if desired.

For stubborn dirt and grime, wet one end of an old toothbrush in rubbing alcohol and gently scrub away!

Also Read : Best GoPro for Hunting

Conclusion about Steps To Do If GoPro Wont Turn On

A lot of people use a Gopro camera and some people will face difficulty when they try to turn on their camera.

This is usually because they haven’t used it for a long time.

Luckily, There are a number of steps you can take to troubleshoot your GoPro if it wont turn on. 

Some problems with cameras will be permanent, but fixing common issues may save you from having to buy a new one. 

Be aware that if you ignore too many problems, it might be time to toss your camera in favor of a new one.

You’ll want to plan ahead so you can avoid missing important events while they’re happening!

Hope you enjoyed reading article about How To Fix If GoPro Wont Turn On.

Leave your queries in comment section if any.